Datasheet 3D Model

ML486PJB Series

High-Reliability Power Inductors

ML486PJB Series offers special construction allowing it to pass vibration testing to 80 G and shock testing to 1000 G.

High temperature materials allow operation in ambient temperatures up to 155°C.
Silver-palladium-platinum-glass frit terminations.

Request Quote:

Part number

Find my part

;

Specifications

Electrical specifications at 25°C.

Part number 1	Inductance (µH) 2 (Tolerance: ±20%)	DCR max (Ω) 3	SRF (MHz) 4		Isat (A) 5			Irms (A) 6
Part number 1	Inductance (µH) 2 (Tolerance: ±20%)	DCR max (Ω) 3	min	typ	10% drop	20% drop	30% drop	20°C rise	40°C rise
ML486PJB122MLZ	1.2	0.040	125	178	5.3	5.4	5.4	0.88	1.3
ML486PJB222MLZ	2.2	0.045	70.0	100	3.9	4.0	4.1	0.80	1.1
ML486PJB332MLZ	3.3	0.055	48.0	68.0	3.5	3.5	3.6	0.80	1.0
ML486PJB472MLZ	4.7	0.070	37.0	53.0	3.0	3.1	3.2	0.72	1.0
ML486PJB682MLZ	6.8	0.095	28.0	40.0	2.6	2.7	2.8	0.72	1.0
ML486PJB103MLZ	10	0.11	25.0	35.0	2.1	2.1	2.2	0.72	1.0
ML486PJB153MLZ	15	0.14	16.0	23.0	2.1	2.2	2.2	0.68	0.96
ML486PJB223MLZ	22	0.23	12.0	17.0	1.4	1.5	1.6	0.64	0.88
ML486PJB333MLZ	33	0.26	9.8	14.0	1.1	1.2	1.2	0.52	0.72
ML486PJB473MLZ	47	0.36	7.0	10.0	0.98	1.0	1.0	0.48	0.64
ML486PJB683MLZ	68	0.42	6.7	9.6	0.58	0.61	0.62	0.46	0.59
ML486PJB104MLZ	100	0.61	5.4	7.7	0.48	0.51	0.52	0.38	0.51
ML486PJB124MLZ	120	0.75	5.2	7.4	0.42	0.45	0.46	0.34	0.46
ML486PJB154MLZ	150	0.92	4.5	6.4	0.39	0.41	0.42	0.32	0.43
ML486PJB224MLZ	220	1.3	3.5	5.0	0.32	0.34	0.35	0.30	0.40
ML486PJB334MLZ	330	2.0	2.7	3.8	0.26	0.27	0.28	0.22	0.31
ML486PJB474MLZ	470	2.6	2.2	3.2	0.22	0.23	0.24	0.19	0.30
ML486PJB684MLZ	680	4.0	2.0	2.8	0.18	0.19	0.20	0.14	0.21
ML486PJB105MLZ	1000	6.0	1.6	2.3	0.15	0.16	0.17	0.12	0.19
ML486PJB155MLZ	1500	9.0	1.3	1.8	0.12	0.13	0.13	0.10	0.16
ML486PJB185MLZ	1800	11.7	1.2	1.7	0.11	0.12	0.12	0.090	0.11
ML486PJB225MLZ	2200	13.5	0.90	1.3	0.10	0.10	0.11	0.090	0.10
ML486PJB335MLZ	3300	21.0	0.80	1.1	0.099	0.10	0.11	0.065	0.090
ML486PJB475MLZ	4700	30.0	0.60	0.90	0.086	0.096	0.10	0.060	0.070
ML486PJB565MLZ	5600	36.0	0.50	0.72	0.077	0.090	0.096	0.055	0.070
ML486PJB685MLZ	6800	43.0	0.50	0.70	0.080	0.086	0.089	0.050	0.060
ML486PJB825MLZ	8200	54.0	0.50	0.69	0.079	0.086	0.088	0.050	0.060
ML486PJB106MLZ	10000	70.0	0.50	0.68	0.050	0.050	0.060	0.045	0.050

Notes

When ordering, please specify screening code: e.g. ML486PJB106MLZ.
Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A.
DCR measured on a micro-ohmmeter.
SRF measured using an Agilent/HP 8753ES or equivalent.
DC current at 25°C that causes the specified inductance drop from its value without current.
Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.

Screening:

Z = Unscreened
Y = Unscreened (SLDC Option A)
W = Unscreened (SLDC Option B)
H = Group A screening per Coilcraft CP-SA-10001
G = Coilcraft CP-SA-10001 Group A (SLDC Option A)
D = Coilcraft CP-SA-10001 Group A (SLDC Option B)
Screening performed to the document’s latest revision.
Custom testing also available.
Country of origin restrictions available; prefix options G or F.

Environmental

Ambient temperature range:

–55°C to +105°C with Irms current

Storage temperature range:

Component: –55°C to +155°C
Packaging: –55°C to +80°C

Maximum part temperature:

+155°C (ambient + temp rise)

Failures in Time (FIT) / Mean Time Between Failures (MTBF):

See FIT/MTBF Calculations

Performance curves

L vs Frequency

L vs Current

Physical characteristics

Dimensions are in ^inches⁄_mm

General specification

Core Material:

Ferrite

Weight:

307 – 352 mg

Packaging:

750/7″reel; Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.57 mm pocket depth

Soldering/Washing

Moisture Sensitivity Level (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Resistance to soldering heat:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles.

Refer to Soldering Coilcraft Components before soldering.

Recommended Pick & Place Nozzle:

OD: 6.2 mm; ID: ≤ 3.1 mm