Datasheet
3D Model
AE558PTA Series
Outgassing Compliant Power Inductors
AE558PTA Series features high temperature materials allowing operation in ambient temperatures up to 155°C.
- Passes NASA low outgassing specifications.
- Tin-lead (Sn-Pb) termination for the best possible board adhesion.
- Tin-lead over gold over nickel over phos bronze terminations.
Specifications
Electrical specifications at 25°C.
| Part number 1 |
Inductance (µH)
2
(Tolerance: ±20%) |
DCR max (mΩ) 3 | SRF (MHz) 4 | Isat (A) 5 | Irms (A) 6 | ||||
|---|---|---|---|---|---|---|---|---|---|
| min | typ | 10% drop | 20% drop | 30% drop | 20°C rise | 40°C rise | |||
| AE558PTA331MSZ | 0.33 | 4.0 | 119 | 170 | 29.5 | 30.0 | 30.5 | 12.5 | 16.3 |
| AE558PTA801MSZ | 0.80 | 4.0 | 70.0 | 100 | 24.9 | 25.2 | 25.6 | 12.5 | 16.3 |
| AE558PTA102MSZ | 1.0 | 4.0 | 66.5 | 95.0 | 16.5 | 17.0 | 17.5 | 12.5 | 16.3 |
| AE558PTA122MSZ | 1.2 | 6.0 | 63.7 | 91.0 | 20.5 | 21.0 | 21.3 | 11.0 | 15.0 |
| AE558PTA132MSZ | 1.3 | 4.0 | 56.7 | 81.0 | 12.9 | 16.8 | 17.2 | 12.5 | 16.3 |
| AE558PTA152MSZ | 1.5 | 4.0 | 52.5 | 75.0 | 13.5 | 14.0 | 14.5 | 11.0 | 15.0 |
| AE558PTA182MSZ | 1.8 | 6.0 | 49.0 | 70.0 | 13.3 | 13.8 | 14.3 | 11.0 | 15.0 |
| AE558PTA202MSZ | 2.0 | 9.0 | 45.5 | 65.0 | 15.3 | 15.8 | 16.2 | 8.5 | 11.5 |
| AE558PTA222MSZ | 2.2 | 4.0 | 40.6 | 58.0 | 8.9 | 9.6 | 10.0 | 12.5 | 16.3 |
| AE558PTA252MSZ | 2.5 | 7.5 | 38.5 | 55.0 | 11.4 | 11.8 | 12.1 | 9.0 | 12.0 |
| AE558PTA322MSZ | 3.2 | 6.0 | 37.1 | 53.0 | 7.3 | 7.8 | 8.5 | 11.0 | 15.0 |
| AE558PTA402MSZ | 4.0 | 9.0 | 32.9 | 47.0 | 8.3 | 8.5 | 8.8 | 8.5 | 11.5 |
| AE558PTA432MSZ | 4.3 | 7.5 | 30.8 | 44.0 | 6.4 | 6.8 | 7.0 | 9.0 | 12.0 |
| AE558PTA572MSZ | 5.7 | 9.0 | 24.5 | 35.0 | 5.4 | 5.8 | 6.0 | 8.5 | 11.5 |
Notes
- When ordering, please specify screening code: AE558PTA572MSZ.
- Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/ HP 4284A or equivalent.
- DCR measured on a micro-ohmmeter.
- SRF measured using an Agilent/HP 8753D network analyzer.
- DC current at 25°C that causes the specified inductance drop from its value without current.
- Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
Screening:
- Z = Unscreened
- Y = Unscreened (SLDC Option A)
- W = Unscreened (SLDC Option B)
- H = Coilcraft CP-SA-10001 Group A
- G = Coilcraft CP-SA-10001 Group A (SLDC Option A)
- D = Coilcraft CP-SA-10001 Group A (SLDC Option B)
- 1/2/3 = EEE-INST-002 (Family 1) Level 1/2/3
- 4/5 = MIL-STD-981 (Family 04) Class B=4, Class S=5
- F = ESCC3201 (F4 operational life performed at 105°C)
- Screening performed to the document’s latest revision.
- Lot qualification (Group B) available.
- Testing T and U have been replaced with more detailed codes 4, 5, and 1, 2, 3, respectively. Codes T and U can still be used, if necessary. Custom testing also available.
- Country of origin restrictions available; prefix option G.
Environmental
Ambient temperature range:
–55°C to +105°C with Irms current.
Storage temperature range:
Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C.
Tape and reel packaging: –55°C to +80°C.
Maximum part temperature:
+155°C (ambient + temp rise).
Failures in Time (FIT) / Mean Time Between Failures (MTBF):
Performance curves
L vs Frequency
L vs Current
Schematics
General specification
Core Material:
Ferrite
Weight:
1.4 – 1.8 g
Packaging:
200/7″ reel Plastic tape: 24 mm wide,0.4 mm thick, 16 mm pocket spacing, 5.45 mm pocket depth.
Soldering/Washing
Moisture Sensitivity Level (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity).
Resistance to soldering heat:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles.
Refer to Soldering Coilcraft Components before soldering.